[Catalyst] FastCGI on dev. server, reloading modules?

[Pedro Melo]

Hi,

On 2009/09/19, at 14:23, Christiaan Kras wrote:

> Because the less difference between the development and production  
> server the better. It lessens the amount of possible problems that  
> can arise when deploying the application to the production server.

I use the same setup: local nginx, all my development is done with Cat  
under fastcgi. But no, I could not find any workaround for restarting  
the service.

melo

>
> Christiaan
>
> -origineel bericht-
> Onderwerp: Re: [Catalyst] FastCGI on dev. server, reloading modules?
> Van: Tomas Doran <bobtfish at bobtfish.net>
> Datum: 19-09-2009 15:02
>
>
> On 19 Sep 2009, at 12:54, Christiaan Kras wrote:
>> So far I've always tested my Catalyst apps running through CGI.
>> Since FastCGI gives such a performance boost I was wondering if I
>> can test with FastCGI without having to manually restart my
>> instances after I've made a change to a controller/model/view/ 
>> anything
>
> Why would you want to do that?
>
> Why aren't you using the development server for development?
>
> Cheers
> t0m
>
> _______________________________________________
> List: Catalyst at lists.scsys.co.uk
> Listinfo: http://lists.scsys.co.uk/cgi-bin/mailman/listinfo/catalyst
> Searchable archive: http://www.mail-archive.com/catalyst@lists.scsys.co.uk/
> Dev site: http://dev.catalyst.perl.org/
>
>
> _______________________________________________
> List: Catalyst at lists.scsys.co.uk
> Listinfo: http://lists.scsys.co.uk/cgi-bin/mailman/listinfo/catalyst
> Searchable archive: http://www.mail-archive.com/catalyst@lists.scsys.co.uk/
> Dev site: http://dev.catalyst.perl.org/