[Catalyst] About Virtual Machine

[Kadir Beyazlı]

Hi Mahmoud,

Thank you very much for help
Infact I had already installed Catalyst to my pc but despite this I thouht
that I had to install wm.
After your mail I wrote following to terminal

*catalyst.pl <http://catalyst.pl> FirstApp*

and it created all directories :) This is awesome.




On Sun, Feb 15, 2015 at 3:56 AM, Mahmoud Mehyar <mamod.mehyar at gmail.com>
wrote:

> Hello,
>
> To make things less confusing I suggest you to use virtualbox instead of
> vmware, you can download it from,
> https://www.virtualbox.org/wiki/Downloads
>
> If you're not familiar with virtual machines, I suggest you to learn
> Catalyst without installing one at all, Catalyst can be installed on your
> own PC without a virtual machine.
>
> *"NOTE: You can use any Perl-supported OS and environment to run Catalyst.*
> It should make little or no difference to Catalyst's operation, *but this
> tutorial has been written using the Debian-based Tutorial Virtual Machine*
> that you can download and use to work through the full tutorial step by
> step."
>
> So a virtual machine is not required to get you started with Catalyst.
>
> You may also check other sources for a quick start, try
>
> http://www.linuxjournal.com/content/introduction-application-development-catalyst-and-perl
>
> a bit old but should give you a simpler starting point with catalyst
>
>
>
> On Sun, Feb 15, 2015 at 1:16 AM, Kadir Beyazlı <kadirbeyazli at gmail.com>
> wrote:
>
>> Dear all,
>>
>> Is there anyone that can help me about this issue?
>> Also, why do we have to use wmware for catalyst?
>>
>> On Sat, Feb 14, 2015 at 1:37 AM, Kadir Beyazlı <kadirbeyazli at gmail.com>
>> wrote:
>>
>>> Hi All,
>>>
>>> I am Kadir Beyazli from Turkey.
>>> I have just joined to mail list
>>> My question may be very basic but I became confused that is why I
>>> decided to write and I need your support
>>> I want to learn Perl Catalyst framework.
>>> I am reading tutorial from following link
>>>
>>> *https://metacpan.org/pod/Catalyst::Manual::Tutorial::01_Intro#STARTING-WITH-THE-TUTORIAL-VIRTUAL-MACHINE
>>> <https://metacpan.org/pod/Catalyst::Manual::Tutorial::01_Intro#STARTING-WITH-THE-TUTORIAL-VIRTUAL-MACHINE>*
>>>
>>> There is following info:
>>>
>>> *Boot the virtual machine using a tool like VMWare Player
>>> http://www.vmware.com/products/player
>>> <http://www.vmware.com/products/player> or VirtualBox
>>> http://www.virtualbox.org/ <http://www.virtualbox.org/>.*
>>>
>>> I opened web site : http://www.vmware.com/products/player
>>>
>>> But there are lots of products at this page so I could not understand
>>> which one should be downloaded. I attached screenshot* vm_1.png*
>>>
>>> I clicked on 1st download link : VMware vCloud Suite
>>>
>>> But another list has been displayed which made me confused. I attached
>>> *vm_2.png*
>>>
>>> Would you please help me about this issue?
>>>
>>>
>>> --
>>>
>>> *Kadir BeyazlıComputer Engineer*
>>> *GSM : +90 535 821 50 00 <%2B90%20535%20821%2050%2000>*
>>>
>>
>>
>>
>> --
>>
>> *Kadir BeyazlıComputer Engineer*
>> *GSM : +90 535 821 50 00 <%2B90%20535%20821%2050%2000>*
>>
>> _______________________________________________
>> List: Catalyst at lists.scsys.co.uk
>> Listinfo: http://lists.scsys.co.uk/cgi-bin/mailman/listinfo/catalyst
>> Searchable archive:
>> http://www.mail-archive.com/catalyst@lists.scsys.co.uk/
>> Dev site: http://dev.catalyst.perl.org/
>>
>>
>
> _______________________________________________
> List: Catalyst at lists.scsys.co.uk
> Listinfo: http://lists.scsys.co.uk/cgi-bin/mailman/listinfo/catalyst
> Searchable archive:
> http://www.mail-archive.com/catalyst@lists.scsys.co.uk/
> Dev site: http://dev.catalyst.perl.org/
>
>


-- 

*Kadir BeyazlıComputer Engineer*
*GSM : +90 535 821 50 00*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.scsys.co.uk/pipermail/catalyst/attachments/20150216/dbdb5744/attachment.htm>